Product Overview:
Resin trap for capturing device resin particles with water to bring out. Online processing resins, if not high strength resin, or a resin tube breakage, the resin will enter the system, the impact of equipment operation, installation of resin trap can prevent the resin into the system. When the resin through, can be captured to intercept, at the same time, the differential pressure is automatically flushed through the interception of resin exhaust system.
Resin trap Category:
Resin trap discrete resin trap, horizontal resin trap, Y type resin trap.
1, Y-type stainless steel interior for single wire around the filter element type, the use of o-ring, equipment lined 1751 semi-hard rubber.
2, horizontal stainless steel interior for a single wire around the filter element type, available water supply and low pressure condensate systems. 1751 semi-hard rubber lining equipment.
3. The internal device is a plurality of vertical stainless steel wire filter element type, device internal corrosion epoxy asphalt black paint. Generally used for large units.
Resin trap filter Features:
1. The filter made of stainless steel trapezoid wire sieve into a V-shaped gap, can effectively block resin impurities.
2. trapezoid wire evenly arranged on the circumference of the support bars, and non-blocking filter area to ensure the screen, avoiding impurities high degree of aggregation.
3. The resin trap filter through all welded connections, durable, long life.
4. work for some time, you can filter backwash, repeated use.
Resin trap advantages:
High capture efficiency, large flow area, good mechanical strength, low pressure.
型号 |
接管规格 |
φxδ |
DN1(mm) |
DN2(mm) |
DN3(mm) |
L(mm) |
L1(mm) |
L2(mm) |
LLGY-80 |
DN80 |
φ325x6 |
80 |
80 |
50 |
282.5 |
337.5 |
588.5 |
LLGY-100 |
DN100 |
φ325x6 |
100 |
100 |
50 |
282.5 |
347 |
619 |
LLGY-125 |
DN125 |
φ325x6 |
125 |
125 |
50 |
282.5 |
360 |
631 |
LLGY-150 |
DN150 |
φ325x6 |
150 |
150 |
50 |
282.5 |
373 |
644 |
LLGY-200 |
DN200 |
φ426x6 |
200 |
200 |
50 |
333 |
491 |
764 |
LLGY-250 |
DN250 |
φ426x6 |
250 |
250 |
50 |
333 |
518 |
837 |
Remarks:
1. The cartridges are made of carbon steel lining, 304,316L.
Wedge filter materials 304,316L, 2205,904L, Hastelloy.
2. Vertical catcher to replace a 90 ° elbow.
3. Horizontal substitute a straight pipe.
4.Y resin catcher internal structure of a single type of stainless steel wire around the filter element, filter element gap of 0.25 mm, using the "O" ring, the structure safe, reliable, easy to repair.